In addition to it's fish finding capability, the LS6100 has the unique ability to be a handy navigational organizer when connected to appropriate sensors. It can display a variety of information including: water temperature, wind direction/speed, Lat/Lon, XTE and distance run in a graphical or text format. With the BBGPS or BBWGPS receiver connected, the "Mini-Navigator" feature is capable of storing up to 12 waypoints with programmable names. Any waypoint can be selected as a destination.

 

Standard Features

• Waterproof, 6 Inch, Silver Brite Monochrome LCD Display
  
  


• Targets presented in up to 4 gray tones
  
  


• Picture resolution of 240(H) x 320(V) pixels
  
  


• 300 Watt RMS (2400 P-P) output power
  
  


• Seven depth scales, from 0-10 to 0-640 feet
  
  


• Depth offset to 1,500 feet, maximum depth scale of 3,000 feet
  
  


• Automatic or Manual Depth Range and Gain Adjustment
  
  


• A-Scope for rapid fish detection and species identification
  
  


• White Line Mode for enhanced bottom fish detection
  
  


• Audible and Visual, Temp, Speed, Fish or Bottom Alarm
  
  


• TLL output sends position, temp and depth to Furuno TLL capable plotters
  
  


• Multiple Display Modes
  
  
  
  1. Normal, Low Frequency/High Frequency
  
  
  
  2. Dual Frequency
  
  
  
  3. Bottom Lock Expansion
  
  
  
  4. Marker Zoom
  
  
  
  5. Bottom Zoom
  
  
  
  6. A-Scope
  
  
  
  7. Two Customizable Navigation Data Display - Displaying digital and analog graphical info, including: Wind Speed/Direction, Ship's Speed, Steering Screens and more
  
  
  
  


• Speed and Temperature input via optional sensor or NMEA data
  
  


• Direct connection of BBGPS or BBWGPS antennas for GPS or WAAS fix
  
  


• Mini Navigator allows storage of up to 12 waypoints, with capability to navigate back to these points using the LS6100's XTE/Range and Bearing calculation and steering screens
  
  


• Two NMEA0183 ports - one bi-directional and one "listen-only"

Shipping Information

• 5Lbs., 1 Carton Less Transducer

Power Requirements

• 12 VDC, 10 Watts